Inregistrator de Soc

The Shock101 and Shock101-EB are fully programmable, tri-axial shock loggers. They measure and record peak acceleration levels for three axis (X, Y and Z) over a user-specified time period. The time period can be programmed using the MadgeTech software from 64 samples per second up to 5 minutes. Independent of the user defined time period, the loggers continuously samples the accelerometers at a rate of 512 Hz to ensure that no event goes uncaptured.

At the end of the user defined time period, the largest acceleration value measured during the time period is recorded to the non-volatile memory (349,525 readings per axis). The data can easily be analyzed using the MadgeTech software, which allows the user to view all data points or to view a summary of statistics such as the average, minimum, and maximum acceleration values. A software calculated vector sum of all three axis is automatically displayed along with all readings to provide the user with the overall acceleration of the equipment or shipment being monitored.

Both the Shock101 and Shock101-EB have user replaceable batteries. The Shock101-EB extends the battery life to more than eight times that of the Shock101.

Specifications

		Shock101
Channels:		Shock (3 axes)
Acceleration Range:		See Table Below
Acceleration Resolution:		See Table Below
Calibrated Acceleration Accuracy:		See Table Below
Memory:		349,525/axis
Sample Rate:		1.953 millisecond (512Hz)
Required Interface Package:		IFC110 or IFC200
Baud Rate:		115,200
Typical Battery Life:		7 days
Operating Environment:		-20~+60°C, 0~95%RH non-condensing
Material:		Anodized aluminum
Dimensions:		3.5" x 4.4" x 1.0" (89mm x 112mm x 26mm)
CE Approval:		Yes
Weight:		15oz.
Designed and manufactured in the USA. National Institute of Standards and Technology (N.I.S.T. USA) Conformity.

Acceleration Range, Calibrated Accuracy, Resolution

Range (g)	±5	±50	±100	±250
Calibrated Accuracy (g)	±0.2	±1	±2	±4
Resolution (g)	0.01	0.05	0.1	0.2 g

Shock101 Graph - MadgeTech Software

Analyze data using the software’s powerful tools to examine, export, and print professional-looking graphs.

Reminder ! IFC computer interface cable required for computer (PC) operation of data loggers. Check the accessories selection below.

Accesories / Software	Description
IFC110	Includes software, manual and RS232 computer interface cable
IFC200	Includes software, manual, Quick Start Guide and USB computer interface cable Note: USB drivers are compatible with Vista 32 bit systems, not Vista 64 bit systems.
USB-1	USB to RS232 converter cable
USB101	Includes software, manual, RS232 (IFC110) computer interface cable and USB to RS232 converter cable
Tibbo DS202R	DS202 Serial to Ethernet Converter The Tibbo DS202R allows MadgeTech Data Loggers to be accessed over a network.
NIST	N.I.S.T. Calibration Certificate
U9VL-J	9.0 Volt, Lithium Battery, 1200 mAH

Tibbo DS202R

The Tibbo DS202R allows MadgeTech Data Loggers to be accessed over a network. This allows for a logger to be placed in remote locations and maintain communications to control and/or monitor the device by creating a serial tunnel (virtual RS232 connection). The DS202R is a simple, yet powerful device, that is useful in many applications where a typical serial device may be used. The Tibbo DS202R is intended for use within network communications, making it quite useful for remote data logging. One Tibbo DS202R can effectively network-enable a single data logger.

Cum platim ?

Pentru a afla modul de plata, luati legatura cu noi prin pagina Contact.

Shock101 - Inregistrator Tri-Axial de Soc

Specifications

Acceleration Range, Calibrated Accuracy, Resolution